iPortable OSx86 Leopard 10.5.4 USB + Software Pack, [MAC - Multi] OSx86 (Leopard) 10.5.4[TNTVillage.scambioetico.org]

iPortable OSx86 Leopard 10.5.4 USB + Software Pack, [MAC - Multi] OSx86 (Leopard) 10.5.4[TNTVillage.scambioetico.org] [Tntvillage.Scambioetico]

Visit this link: %20OSx86%20(Leopard)%2010.5.4[TNTVillage.scambioetico.org]&sb=1&sd=0&cat=0]More info on this torrent

Visit this link: All My Torrent









Portable 10.5.4 (intel optimized) right now wating for a upload..

Major changes:

Little bit smaller.....but with ALL system and software is updated...

newer kernels added..

a lot more networkcard and wireless drivers and tools included.........

10.5.5 Graphic's update included to install (downloadsfolder)

Videocard Injectors..

By default NTFS read&write and added NTFS format option in DiskUtillity

Added Hackingtosh tools

Updated little snitcher protecting your private data by default...

Himmelbar startmenu ...

EFI 9.0

and more ...

iPortable INTEL/AMD 10.5.5 universal coming very soon !!

bye

OSx86 iPortable 10.5.4 USB stick image INTEL only (sse2/sse3 or up..) with universal chameleon bootloader..

Re-ripped, rebuild and tweaked by Protocol-X to make this Leopard.. The second Portable (USB) Live edition...

Note: it is slow running on older PC's running from an USB stick..Main reason is the limitation in speed on a USB stick..(Just a power over USB portable harddrive is a lot faster.., but not so fucking portable as a stick!!)
it's meant to repair and rescue your current OS, or clone it to your harddrive or other destination....If it won't boot, try to install Chameleon bootloader on destination.. otherwise.. It's bad luck.. your PC isn't supported.. (you always can try to hack the BIOS firmware of your motherboard.......die hards only !!)

you can find HELP on:

# kalyway.DVD irc.osx86.hu
# leopard irc.osx86.hu
# www.muzzle.nl (Dutch Hackintosh community)
# OSx86 Hackintosh forums spread over the whole wide .net...
# When your network card driver is installed, try Firefox... there are interesting OSx86 links...

Read carefully !!!

AMD not supported, INTEL only [SSE2/SSE3] or higher.. (for AMD you always can try patch it after cloning..)

English only !! All languages and other platform system architectures are removed !! except dutch option is left in..(je zult alsnog Nederlands apart moeten installeren als gij dat wenst..)
You can always re-install this languages etc. very easy afterwards..

TO INSTALL:

Drivegenius 2 is fastest way to clone with unmounting both drives..mount USB image, choose that as source disk... and make your USB stick the destination disk !! If it won't boot..install Chameleon Bootloader on your (USB) destination disk !!

You can use CarbonCopyCloner 3, DriveGenius 2, or other cloner.. Select this included diskimage as source disk, or mount it first...then select mounted partition/Try to force a clone on block-level !! [try to force a clone on a location where you can unmount both source and destination (the only easy and proper way to do this is with 2 physcally USB and/or harddrives already installed..) But is also possible to have succes without unmouting the drives (source and destination) Always try
to unmount destination disk first.....

Clonetools H1. With Clonetools H1 choose Hackingtosh architecture, and clone it to your desired location !

Always Repair your Permissions after cloning..

If it won't boot after cloning.. Install Chameleon bootloader on the destination disk, it should be bootable from a USB stick.....or your PC isn't supported..

Login:

User = protocolxleohacked
Password = x


iTunes, iChat, Mail, iPhoto, DVD Player etc.. are removed..
All videodrivers are removed.. to prevent problems on some systems !! Except some Intel videodrivers are left in..

Spotlight is disabled, you can turn it on with cache Cleaner..

Install your own OSx86 videodriver after cloning..in Downloads folder you can find Graphics Update 10.5.4-10.5.5 after installation, OSx86 tools will help.......
After succes you can enable QuartzExtreme 2D for even more video acceleration with Quartzsimple in OSX Utilities folder..OpenGL with OSx86 tools.. With video-hardware acceleration Leopard should be running like hell..(NOW IN 10.5.4 in Downloads folder there is a 10.5.5 Graphics update, install it and choose your string or injector)

Don't try to install OS system updates, unless you know exactly what you're doing !!


based on Universal x86 DVD 10.5.2 and INTEL 10.5.3 update version of Kalyway..

based on slipstream script by DENSE ! ;)

ich9 support by DUNE ! ;)

updated with iATKOS 10.5.4 Intel system

Rebuild, tweaked and updated by ProtocolX ! :)


Notes: If you have problems with booting your (USB) Drive after cloning, install Chameleon bootloader on the destination disk.

To get a higher resolution without a videodriver hit F8 at Darwin's promt and type: "Graphics Mode"="1280x1024x32"


if you have problems with installing your videodriver on reboot with video gfx (blue or black screen)

All you have to do is just press F8 at Darwin's prompt and then type -x, (safe mode) and/or -s (single user mode) then

at root type mount -uw /

and /movevideodrivers

then it will be prompt to move video drivers by class ( nvidia ; ati ; or intel gma) voila!

type yes to confirm or enter to skip !

After trying updating your system, type: update -v at Darwin's prompt..


more options for Darwin's promt:

* -f This forces rebuilding of extensions cache
* -s Boots into a single user command line mode
* -v Verbose, boots in text mode showing all debug info and errors
* -x Boots into safe mode
* -F Ignore configurationfile
* rd=disk0s1 - Tells Darwin to boot from a certain partition specified in BSD format.
(Disk 0 specifies first HDD and s1 specifies first partition as 0 is the MBR.)
* cpus=1 Tells the system how many CPUs or cores to use, useful for Core Duo users.
* platform=X86PC - Can be used if problems with normal booting, ACPI is another option here
* -legacy Boots OS X in 32bit mode rather than 64bit if 64bit is used due to a 64bit processor
* idehalt=0 May stop stuttering
* "Graphics Mode"="WIDTHxHEIGHTxDEPTH" (e.g. "1024x768x32")
For VESA 3.0 graphics, you may append a refresh rate
after an "@" character (e.g. "[email protected]")
* kernel: kernel name (e.g. "mach_kernel" - must be in "/" )

If you need to copy the bootloader to the MBR use this command:

fdisk -u /dev/rdisk0


All the permanent settings are stored under /Library/Preferences/SystemConfiguration/com.apple.Boot.plist and a good way to edit this is using nano in the command line. Another way is to drag it to the desktop, edit with TextEdit and then overwrite the original but this usually saves time with ownership issues.
Just copy and delete orginal from location, and edit on desktop with textedit...
But for instance to open it in the terminal I would go:

sudo -s

nano /Library/Preferences/SystemConfiguration/com.apple.Boot.plist

You will then see something similar to this:





Kernel
mach_kernel
Kernel Flags

Boot Graphics
Yes
Timeout
10
Quiet Boot
No



Let's look at what each of these do.

* Kernel - this tells the bootloader which kernel to boot with.
* Boot Graphics - this tells it whether to show the pretty Apple loading screen or not
* Timeout - this is the time before the default boot option is chosen
* Quiet Boot - if set to yes the OS boots straight to the GUI without showing the bootloader, if set to no it boots to the bootloader first.
To use the chain0 boot method this MUST be set to 'No'. To access the bootloader when this is set to 'Yes' bash F8 repeatedly during boot till it displays.

You can set more than mentioned above but those are the standard ones and any of the following can be added using keys such as "" or "" to the config file. All commands in darwinbootloader you can put in plist file.....

An example of a configuration to boot OS X in safe mode, verbosely, with 1024x768 resolution forced and with the 2nd partition as default is as follows:





Kernel
mach_kernel
Kernel Flags
-v
-x
rd=disk0s2
Graphics Mode
1024x768x32
Boot Graphics
No
Timeout
10
Quiet Boot

No




Save your plist file on desktop, with extension .plist, delete orginal, place your own, Repair Permissions with Disk Utillity, Reboot...


Even if you have chosen a kernel.. you can still try the others kernels for testing ! (same thing for Kalyway dvd boot except that only modbinkernel , speedstepkernel , kabylkernel and nforcekernel are available as boot options !)


All you have to do is just press F8 at Darwin's prompt and then type the kernel's name you want to boot with :

sleepkernel (intel/amd/sse2/sse3)
speedstepkernel (intel/amd/sse2/sse3)
nforcekernel (intel/sse3)
modbinkernel (intel/amd/sse3)
vanillakernel (intel/sse3)
kabylkernel (intel/sse3) with sleep support


Kernels:

kernel_9.2_sleep
kernel_9.2_speedstep
kernel_9.2.2_kabyl
kernel_92_nforce
kernel_vanilla_922
kernel_9.3_modbin
kernel_9.4_modin
kernel_9.4_StageXNU

default boot is modbin 9.4 kernel.. -v at Darwin's prompt will boot modbin's 9.2 kernel..

ThanX to Kalyway for this..


Included 3rd party Applications:

AppZapper [software de-installer]
Audio Tool Player [all audio tool]
Clonetools_H1 [cloner]
CarbonCopyCloner 3 [cloner]
Drive Genius 2.1 [All Disk Management]
DiscEraser [erases CD-DVD/RW]
Crossover Pro 7 [runs a lot of Windows software without emulation !!]
CocoThumbX (very easy icon maker)
YummyFTP [FTP client]
Stainless [fast simple multiprocessor browser]
Minefield [Mozilla Firefox Intel Optimized]
Fast icons [very good icontool]
FolderLister [drag folder to list content]
GrandPerspective [drive mapper]
HardwareGrowler
IceClean [systemtool]
Flip4Mac WMF plugin for Quicktime]
KCNScrew [software info 1 december 2008]
Leopard Cache Cleaner [systemtool]
Magic Number Machine
Himmelbar [App launcher]
Fasticns [icon maker]
iDefrag [not only very good defrag, but can also repair B-Tree files !!!]
iSSH [remote login]
Little Snitcher [Very fine small, light Firewall, to prevent outgoing commu.]
OnyX [system tweaktool]
QuickTime Player Pro
Simply Burns
SimplyRAR [RAR compressor]
Telling Folders [Gives folder a icon]
TinkerTool [tweak system]
Mac Telnet [advanced telnet client]
Netrestore [remotely clone or restore a disk or image]
Transmission [fine torrentclient]
UnRARx 2.2 [RAR extractor]
Verbalize [Mac Talks, only Alex's voice is left out.. because of it's big size..]
Xupport 3 [tweak hidden OSX settings]
VLC Player [mediaplayer]
xMod [OSX mod]
Xbench [benchmark]


OSx86 Tools:

EFIStudio
Extensions-Repair
HexEditors
Kext Helper b7
DPCI Manager
EFiX Updater
Kextpermissions.command
KeyViewer
OSX86 Tools
Pacifist
PackageMaker
Preferential Treatment
Property List Editor 2.2
Plist Editor Pro
Repair & Set Permissions 1.0
USB Prober
NVCAP Maker
gfxutil
NTFS - 3G [NTFS writer, to remove look in Downloads folder]
and more.....

Created with folderLister



Note: X11 is installed.. this is needed in many cases to run Windows or Linux Software.. or other platform related tasks..
But it crashes on my USB stick, I tried to repair this, with no succes.. But I found out.. After cloning (not on a USB stick)
You can repair your Permissions of your cloned disk, and then it should work.. Possible reason for the X11 crash
is the USB stick, but also X11 itself, this User edition wasn't very stable after all..
(full install on the 7.5GB orginal Apple Leopard Disc can help, search for developertools)

BIG THX to Kalyway, Chameleon team, Maxxuss, Dune , Dense , modbin, jas , Joe75 , etorix , netkas , rp4k , tehmachacker ,zef , kabyl , magicone , jacquesdupontd , lastexile , chiva4ry , Uphuck, rofl , unisex ,asap18 ,iAtkos, ProtocolX, xyz ,XxX yourself and all the others ! U know who you are!


Think of this as of a demo version and as of a free marketing campaign. Therefore, let it be...

ENJOY ! the best operatingsystem serving the planet !.....if you love MacOSX think to buy it !!!


We are not, in any possible way, pirates, and we do condemn piracy of Apple products and software as much as Apple itself does.
Developers own legally bought copies of OSX, and so you all should......
It costs much less than Windows and it is much better than Windows...Microsoft killed the legendary Amiga , that's not what's going to happen with Apple..
Try this Portable USB version, clone it free and try it... If you like it.. Buy it and then play with it, this is the spirit of OSX86..
learn about it, become a better person out of this experience!
Apple produces amazing software and amazing computers. Do yourself a favour and support them as we do !!!


This live iPortable stick should only be used to preview Mac OS X Leopard. If you really like Mac OS X Leopard and you want to use it............

you maybe should get a real Mac. If buying a real Mac is too much, you can, at least, buy a license for Mac OS X Leopard...









Size: 2,41gb
Language: Multi
Version: 10.5.4
Genre: OS



24h/24h fino a 20 completati 40kb

Visit http://www.tntvillage.scambioetico.org/